ReactOS 0.4.16-dev-306-g647d351
|
Network sockets abstraction layer to integrate Mbed TLS into a BSD-style sockets API. More...
Go to the source code of this file.
Classes | |
struct | mbedtls_net_context |
Macros | |
#define | MBEDTLS_ERR_NET_SOCKET_FAILED -0x0042 |
#define | MBEDTLS_ERR_NET_CONNECT_FAILED -0x0044 |
#define | MBEDTLS_ERR_NET_BIND_FAILED -0x0046 |
#define | MBEDTLS_ERR_NET_LISTEN_FAILED -0x0048 |
#define | MBEDTLS_ERR_NET_ACCEPT_FAILED -0x004A |
#define | MBEDTLS_ERR_NET_RECV_FAILED -0x004C |
#define | MBEDTLS_ERR_NET_SEND_FAILED -0x004E |
#define | MBEDTLS_ERR_NET_CONN_RESET -0x0050 |
#define | MBEDTLS_ERR_NET_UNKNOWN_HOST -0x0052 |
#define | MBEDTLS_ERR_NET_BUFFER_TOO_SMALL -0x0043 |
#define | MBEDTLS_ERR_NET_INVALID_CONTEXT -0x0045 |
#define | MBEDTLS_ERR_NET_POLL_FAILED -0x0047 |
#define | MBEDTLS_ERR_NET_BAD_INPUT_DATA -0x0049 |
#define | MBEDTLS_NET_LISTEN_BACKLOG 10 |
#define | MBEDTLS_NET_PROTO_TCP 0 |
#define | MBEDTLS_NET_PROTO_UDP 1 |
#define | MBEDTLS_NET_POLL_READ 1 |
#define | MBEDTLS_NET_POLL_WRITE 2 |
Typedefs | |
typedef struct mbedtls_net_context | mbedtls_net_context |
Functions | |
void | mbedtls_net_init (mbedtls_net_context *ctx) |
Initialize a context Just makes the context ready to be used or freed safely. | |
int | mbedtls_net_connect (mbedtls_net_context *ctx, const char *host, const char *port, int proto) |
Initiate a connection with host:port in the given protocol. | |
int | mbedtls_net_bind (mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto) |
Create a receiving socket on bind_ip:port in the chosen protocol. If bind_ip == NULL, all interfaces are bound. | |
int | mbedtls_net_accept (mbedtls_net_context *bind_ctx, mbedtls_net_context *client_ctx, void *client_ip, size_t buf_size, size_t *ip_len) |
Accept a connection from a remote client. | |
int | mbedtls_net_poll (mbedtls_net_context *ctx, uint32_t rw, uint32_t timeout) |
Check and wait for the context to be ready for read/write. | |
int | mbedtls_net_set_block (mbedtls_net_context *ctx) |
Set the socket blocking. | |
int | mbedtls_net_set_nonblock (mbedtls_net_context *ctx) |
Set the socket non-blocking. | |
void | mbedtls_net_usleep (unsigned long usec) |
Portable usleep helper. | |
int | mbedtls_net_recv (void *ctx, unsigned char *buf, size_t len) |
Read at most 'len' characters. If no error occurs, the actual amount read is returned. | |
int | mbedtls_net_send (void *ctx, const unsigned char *buf, size_t len) |
Write at most 'len' characters. If no error occurs, the actual amount read is returned. | |
int | mbedtls_net_recv_timeout (void *ctx, unsigned char *buf, size_t len, uint32_t timeout) |
Read at most 'len' characters, blocking for at most 'timeout' seconds. If no error occurs, the actual amount read is returned. | |
void | mbedtls_net_free (mbedtls_net_context *ctx) |
Gracefully shutdown the connection and free associated data. | |
Network sockets abstraction layer to integrate Mbed TLS into a BSD-style sockets API.
The network sockets module provides an example integration of the Mbed TLS library into a BSD sockets implementation. The module is intended to be an example of how Mbed TLS can be integrated into a networking stack, as well as to be Mbed TLS's network integration for its supported platforms.
The module is intended only to be used with the Mbed TLS library and is not intended to be used by third party application software directly.
The supported platforms are as follows:
Definition in file net_sockets.h.
#define MBEDTLS_ERR_NET_ACCEPT_FAILED -0x004A |
Could not accept the incoming connection.
Definition at line 83 of file net_sockets.h.
#define MBEDTLS_ERR_NET_BAD_INPUT_DATA -0x0049 |
Input invalid.
Definition at line 91 of file net_sockets.h.
#define MBEDTLS_ERR_NET_BIND_FAILED -0x0046 |
Binding of the socket failed.
Definition at line 81 of file net_sockets.h.
#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL -0x0043 |
Buffer is too small to hold the data.
Definition at line 88 of file net_sockets.h.
#define MBEDTLS_ERR_NET_CONN_RESET -0x0050 |
Connection was reset by peer.
Definition at line 86 of file net_sockets.h.
#define MBEDTLS_ERR_NET_CONNECT_FAILED -0x0044 |
The connection to the given server / port failed.
Definition at line 80 of file net_sockets.h.
#define MBEDTLS_ERR_NET_INVALID_CONTEXT -0x0045 |
The context is invalid, eg because it was free()ed.
Definition at line 89 of file net_sockets.h.
#define MBEDTLS_ERR_NET_LISTEN_FAILED -0x0048 |
Could not listen on the socket.
Definition at line 82 of file net_sockets.h.
#define MBEDTLS_ERR_NET_POLL_FAILED -0x0047 |
Polling the net context failed.
Definition at line 90 of file net_sockets.h.
#define MBEDTLS_ERR_NET_RECV_FAILED -0x004C |
Reading information from the socket failed.
Definition at line 84 of file net_sockets.h.
#define MBEDTLS_ERR_NET_SEND_FAILED -0x004E |
Sending information through the socket failed.
Definition at line 85 of file net_sockets.h.
#define MBEDTLS_ERR_NET_SOCKET_FAILED -0x0042 |
Failed to open a socket.
Definition at line 79 of file net_sockets.h.
#define MBEDTLS_ERR_NET_UNKNOWN_HOST -0x0052 |
Failed to get an IP address for the given hostname.
Definition at line 87 of file net_sockets.h.
#define MBEDTLS_NET_LISTEN_BACKLOG 10 |
The backlog that listen() should use.
Definition at line 93 of file net_sockets.h.
#define MBEDTLS_NET_POLL_READ 1 |
Used in mbedtls_net_poll
to check for pending data
Definition at line 98 of file net_sockets.h.
#define MBEDTLS_NET_POLL_WRITE 2 |
Used in mbedtls_net_poll
to check if write possible
Definition at line 99 of file net_sockets.h.
#define MBEDTLS_NET_PROTO_TCP 0 |
The TCP transport protocol
Definition at line 95 of file net_sockets.h.
#define MBEDTLS_NET_PROTO_UDP 1 |
The UDP transport protocol
Definition at line 96 of file net_sockets.h.
Wrapper type for sockets.
Currently backed by just a file descriptor, but might be more in the future (eg two file descriptors for combined IPv4 + IPv6 support, or additional structures for hand-made UDP demultiplexing).
int mbedtls_net_accept | ( | mbedtls_net_context * | bind_ctx, |
mbedtls_net_context * | client_ctx, | ||
void * | client_ip, | ||
size_t | buf_size, | ||
size_t * | ip_len | ||
) |
Accept a connection from a remote client.
bind_ctx | Relevant socket |
client_ctx | Will contain the connected client socket |
client_ip | Will contain the client IP address, can be NULL |
buf_size | Size of the client_ip buffer |
ip_len | Will receive the size of the client IP written, can be NULL if client_ip is null |
int mbedtls_net_bind | ( | mbedtls_net_context * | ctx, |
const char * | bind_ip, | ||
const char * | port, | ||
int | proto | ||
) |
Create a receiving socket on bind_ip:port in the chosen protocol. If bind_ip == NULL, all interfaces are bound.
ctx | Socket to use |
bind_ip | IP to bind to, can be NULL |
port | Port number to use |
proto | Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP |
int mbedtls_net_connect | ( | mbedtls_net_context * | ctx, |
const char * | host, | ||
const char * | port, | ||
int | proto | ||
) |
Initiate a connection with host:port in the given protocol.
ctx | Socket to use |
host | Host to connect to |
port | Port to connect to |
proto | Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP |
void mbedtls_net_free | ( | mbedtls_net_context * | ctx | ) |
Gracefully shutdown the connection and free associated data.
ctx | The context to free |
void mbedtls_net_init | ( | mbedtls_net_context * | ctx | ) |
Initialize a context Just makes the context ready to be used or freed safely.
ctx | Context to initialize |
int mbedtls_net_poll | ( | mbedtls_net_context * | ctx, |
uint32_t | rw, | ||
uint32_t | timeout | ||
) |
Check and wait for the context to be ready for read/write.
FD_SETSIZE
or greater.ctx | Socket to check |
rw | Bitflag composed of MBEDTLS_NET_POLL_READ and MBEDTLS_NET_POLL_WRITE specifying the events to wait for:
|
timeout | Maximal amount of time to wait before returning, in milliseconds. If timeout is zero, the function returns immediately. If timeout is -1u, the function blocks potentially indefinitely. |
Read at most 'len' characters. If no error occurs, the actual amount read is returned.
ctx | Socket |
buf | The buffer to write to |
len | Maximum length of the buffer |
Read at most 'len' characters, blocking for at most 'timeout' seconds. If no error occurs, the actual amount read is returned.
FD_SETSIZE
or greater.ctx | Socket |
buf | The buffer to write to |
len | Maximum length of the buffer |
timeout | Maximum number of milliseconds to wait for data 0 means no timeout (wait forever) |
Write at most 'len' characters. If no error occurs, the actual amount read is returned.
ctx | Socket |
buf | The buffer to read from |
len | The length of the buffer |
int mbedtls_net_set_block | ( | mbedtls_net_context * | ctx | ) |
Set the socket blocking.
ctx | Socket to set |
int mbedtls_net_set_nonblock | ( | mbedtls_net_context * | ctx | ) |
Set the socket non-blocking.
ctx | Socket to set |