Flags

Collaboration diagram for Flags:

Macros
#define	NETIF_FLAG_UP   0x01U
#define	NETIF_FLAG_BROADCAST   0x02U
#define	NETIF_FLAG_LINK_UP   0x04U
#define	NETIF_FLAG_ETHARP   0x08U
#define	NETIF_FLAG_ETHERNET   0x10U
#define	NETIF_FLAG_IGMP   0x20U
#define	NETIF_FLAG_MLD6   0x40U

Detailed Description

Macro Definition Documentation

NETIF_FLAG_BROADCAST

#define NETIF_FLAG_BROADCAST   0x02U

If set, the netif has broadcast capability. Set by the netif driver in its init function.

Definition at line 87 of file netif.h.

NETIF_FLAG_ETHARP

#define NETIF_FLAG_ETHARP   0x08U

If set, the netif is an ethernet device using ARP. Set by the netif driver in its init function. Used to check input packet types and use of DHCP.

Definition at line 97 of file netif.h.

NETIF_FLAG_ETHERNET

#define NETIF_FLAG_ETHERNET   0x10U

If set, the netif is an ethernet device. It might not use ARP or TCP/IP if it is used for PPPoE only.

Definition at line 101 of file netif.h.

NETIF_FLAG_IGMP

#define NETIF_FLAG_IGMP   0x20U

If set, the netif has IGMP capability. Set by the netif driver in its init function.

Definition at line 104 of file netif.h.

NETIF_FLAG_LINK_UP

#define NETIF_FLAG_LINK_UP   0x04U

If set, the interface has an active link (set by the network interface driver). Either set by the netif driver in its init function (if the link is up at that time) or at a later point once the link comes up (if link detection is supported by the hardware).

Definition at line 93 of file netif.h.

NETIF_FLAG_MLD6

#define NETIF_FLAG_MLD6   0x40U

If set, the netif has MLD6 capability. Set by the netif driver in its init function.

Definition at line 107 of file netif.h.

NETIF_FLAG_UP

#define NETIF_FLAG_UP   0x01U

Whether the network interface is 'up'. This is a software flag used to control whether this network interface is enabled and processes traffic. It must be set by the startup code before this netif can be used (also for dhcp/autoip).

Definition at line 84 of file netif.h.