ReactOS 0.4.15-dev-8390-g075894b
eeprom_data.c
Go to the documentation of this file.
1/*
2 * PROJECT: ReactOS DC21x4 Driver
3 * LICENSE: GPL-2.0-or-later (https://spdx.org/licenses/GPL-2.0-or-later)
4 * PURPOSE: EEPROM data for boards without the standard SROM Format
5 * COPYRIGHT: Copyright 2023 Dmitry Borisov <di.sean@protonmail.com>
6 */
7
8/* Adapted from the Linux tulip driver written by Donald Becker */
9
10/* INCLUDES *******************************************************************/
11
12#include "dc21x4.h"
13
14/* GLOBALS ********************************************************************/
15
16/* Asante */
18{
19 0x00, 0x00, 0x94,
20
21 0x00, 0x08, // Default Autoselect
22 0x00, // GPIO direction
23 0x01, // 1 block
24
25 0x80 + 12, // Extended block, 12 bytes
26 0x01, // MII
27 0x00, // PHY #0
28 0x00, // GPIO stream length
29 0x00, // Reset stream length
30 0x00, 0x78, // Capabilities
31 0xE0, 0x01, // Advertisement
32 0x00, 0x50, // FDX
33 0x00, 0x18, // TTM
34};
35
36/* SMC 9332DST */
38{
39 0x00, 0x00, 0xC0,
40
41 0x00, 0x08, // Default Autoselect
42 0x1F, // GPIO direction
43 0x04, // 4 blocks
44
45 0x00, // GPR 0
46 0x00, // GPIO data
47 0x9E, 0x00, // Command 0x009E
48
49 0x04, // GPR 4
50 0x00, // GPIO data
51 0x9E, 0x00, // Command 0x009E
52 0x03, // GPR 3
53 0x09, // GPIO data
54 0x6D, 0x00, // Command 0x006D
55
56 0x05, // GPR 5
57 0x09, // GPIO data
58 0x6D, 0x00, // Command 0x006D
59};
60
61/* Cogent EM100 */
63{
64 0x00, 0x00, 0x92,
65
66 0x00, 0x08, // Default Autoselect
67 0x3F, // GPIO direction
68 0x06, // 6 blocks
69
70 0x07, // GPR 7
71 0x01, // GPIO data
72 0x21, 0x80, // Command 0x8021
73
74 0x08, // GPR 8
75 0x01, // GPIO data
76 0x21, 0x80, // Command 0x8021
77
78 0x00, // GPR 0
79 0x01, // GPIO data
80 0x9E, 0x00, // Command 0x009E
81
82 0x04, // GPR 4
83 0x01, // GPIO data
84 0x9E, 0x00, // Command 0x009E
85
86 0x03, // GPR 3
87 0x01, // GPIO data
88 0x6D, 0x00, // Command 0x006D
89
90 0x05, // GPR 5
91 0x01, // GPIO data
92 0x6D, 0x00, // Command 0x006D
93};
94
95/* Maxtech NX-110 */
97{
98 0x00, 0x00, 0xE8,
99
100 0x00, 0x08, // Default Autoselect
101 0x13, // GPIO direction
102 0x05, // 5 blocks
103
104 0x01, // GPR 1
105 0x10, // GPIO data
106 0x9E, 0x00, // Command 0x009E
107
108 0x00, // GPR 0
109 0x00, // GPIO data
110 0x9E, 0x00, // Command 0x009E
111
112 0x04, // GPR 4
113 0x00, // GPIO data
114 0x9E, 0x00, // Command 0x009E
115
116 0x03, // GPR 3
117 0x03, // GPIO data
118 0x6D, 0x00, // Command 0x006D
119
120 0x05, // GPR 5
121 0x03, // GPIO data
122 0x6D, 0x00, // Command 0x006D
123};
124
125/* Accton EN1207 */
127{
128 0x00, 0x00, 0xE8,
129
130 0x00, 0x08, // Default Autoselect
131 0x1F, // GPIO direction
132 0x05, // 5 blocks
133
134 0x01, // GPR 1
135 0x1B, // GPIO data
136 0x00, 0x00, // Command 0x0000
137
138 0x00, // GPR 0
139 0x0B, // GPIO data
140 0x9E, 0x00, // Command 0x009E
141
142 0x04, // GPR 4
143 0x0B, // GPIO data
144 0x9E, 0x00, // Command 0x009E
145
146 0x03, // GPR 3
147 0x1B, // GPIO data
148 0x6D, 0x00, // Command 0x006D
149
150 0x05, // GPR 5
151 0x1B, // GPIO data
152 0x6D, 0x00, // Command 0x006D
153};
154
155/* NetWinder */
157{
158 0x00, 0x10, 0x57,
159
160 0x00, 0x08, // Default Autoselect
161 0x01, // 1 block
162
163 0x80 + 21, // Extended block, 21 bytes
164 0x03, // MII
165 0x01, // PHY #1
166 0x00, // GPIO stream length
167 0x03, // Reset stream length
168 0x21, 0x08,
169 0x00, 0x00,
170 0x01, 0x00,
171 0x00, 0x00, // Capabilities
172 0xE1, 0x01, // Advertisement
173 0x00, 0x00, // FDX
174 0x00, 0x00, // TTM
175 0x00, // PHY cannot be unplugged
176};
177
178/* Cobalt Microserver */
180{
181 0x00, 0x10, 0xE0,
182
183 0x00, 0x08, // Default Autoselect
184 0x01, // 1 block
185
186 0x80 + 21, // Extended block, 21 bytes
187 0x03, // MII
188 0x00, // PHY #0
189 0x00, // GPIO stream length
190 0x04, // Reset stream length
191 0x01, 0x08, // Set control mode, GP0 output
192 0x00, 0x00, // Drive GP0 Low (RST is active low)
193 0x00, 0x08, // Control mode, GP0 input (undriven)
194 0x00, 0x00, // Clear control mode
195 0x00, 0x78, // Capabilities: 100TX FDX + HDX, 10bT FDX + HDX
196 0xE0, 0x01, // Advertise all above
197 0x00, 0x50, // FDX all above
198 0x00, 0x18, // Set fast TTM in 100bt modes
199 0x00, // PHY cannot be unplugged
200};
201
202#if DBG
203#define DEFINE_BOARD(Leaf, Name) { Name, Leaf, sizeof(Leaf) - 3 /* OUI (3 bytes) */}
204#else
205#define DEFINE_BOARD(Leaf, Name) { Leaf, sizeof(Leaf) - 3 }
206#endif
207
210{
211 DEFINE_BOARD(SRompLeafAsante, "Asante"),
212 DEFINE_BOARD(SRompLeaf9332, "SMC 9332DST"),
213 DEFINE_BOARD(SRompLeafEm100, "Cogent EM100"),
214 DEFINE_BOARD(SRompLeafNx110, "Maxtech NX-110"),
215 DEFINE_BOARD(SRompLeafEn1207, "Accton EN1207"), // Must be defined after the NX-110
216 DEFINE_BOARD(SRompLeafNetWinder, "NetWinder"),
217 DEFINE_BOARD(SRompLeafCobaltMicroserver, "Cobalt Microserver"),
219};
#define NULL
Definition: types.h:112
#define DC_PG_DATA
Definition: util.h:41
#define DEFINE_BOARD(Leaf, Name)
Definition: eeprom_data.c:205
static DC_PG_DATA UCHAR SRompLeafCobaltMicroserver[]
Definition: eeprom_data.c:179
DC_PG_DATA DC_SROM_REPAIR_ENTRY SRompRepairData[]
Definition: eeprom_data.c:209
static DC_PG_DATA UCHAR SRompLeafNetWinder[]
Definition: eeprom_data.c:156
static DC_PG_DATA UCHAR SRompLeafEm100[]
Definition: eeprom_data.c:62
static DC_PG_DATA UCHAR SRompLeafNx110[]
Definition: eeprom_data.c:96
static DC_PG_DATA UCHAR SRompLeafEn1207[]
Definition: eeprom_data.c:126
static DC_PG_DATA UCHAR SRompLeaf9332[]
Definition: eeprom_data.c:37
static DC_PG_DATA UCHAR SRompLeafAsante[]
Definition: eeprom_data.c:17
Definition: eeprom.h:20
unsigned char UCHAR
Definition: xmlstorage.h:181