ATAPI_FORMAT_UNIT ATAPI_IR_COD ATAPI_IR_IO ATAPI_MODE_SELECT ATAPI_MODE_SENSE AtapiSoftReset BROKEN_ADAPTERS BrokenAdapters DFLAGS_ATAPI_CHANGER DFLAGS_ATAPI_DEVICE DFLAGS_CHANGER_INITED DFLAGS_DEVICE_PRESENT DFLAGS_INT_DRQ DFLAGS_MEDIA_STATUS_ENABLED DFLAGS_REMOVABLE_DRIVE DFLAGS_SANYO_ATAPI_CHANGER DFLAGS_TAPE_DEVICE GetBaseStatus GetStatus IDE_COMMAND_ATAPI_IDENTIFY IDE_COMMAND_ATAPI_PACKET IDE_COMMAND_ATAPI_RESET IDE_COMMAND_ENABLE_MEDIA_STATUS IDE_COMMAND_GET_MEDIA_STATUS IDE_COMMAND_IDENTIFY IDE_COMMAND_MEDIA_EJECT IDE_COMMAND_READ IDE_COMMAND_READ_DMA IDE_COMMAND_READ_MULTIPLE IDE_COMMAND_RECALIBRATE IDE_COMMAND_SEEK IDE_COMMAND_SET_DRIVE_PARAMETERS IDE_COMMAND_SET_MULTIPLE IDE_COMMAND_VERIFY IDE_COMMAND_WRITE IDE_COMMAND_WRITE_DMA IDE_COMMAND_WRITE_MULTIPLE IDE_DC_DISABLE_INTERRUPTS IDE_DC_REENABLE_CONTROLLER IDE_DC_RESET_CONTROLLER IDE_DRIVE_SELECT_1 IDE_DRIVE_SELECT_2 IDE_ERROR_BAD_BLOCK IDE_ERROR_COMMAND_ABORTED IDE_ERROR_DATA_ERROR IDE_ERROR_END_OF_MEDIA IDE_ERROR_ID_NOT_FOUND IDE_ERROR_ILLEGAL_LENGTH IDE_ERROR_MEDIA_CHANGE IDE_ERROR_MEDIA_CHANGE_REQ IDE_STATUS_BUSY IDE_STATUS_CORRECTED_ERROR IDE_STATUS_DRDY IDE_STATUS_DRQ IDE_STATUS_DSC IDE_STATUS_ERROR IDE_STATUS_IDLE IDE_STATUS_INDEX IdeHardReset IDENTIFY_CAPABILITIES_DMA_SUPPORTED IDENTIFY_CAPABILITIES_LBA_SUPPORTED IDENTIFY_DATA_SIZE IDENTIFY_DMA_CYCLES_MODE_0 IDENTIFY_DMA_CYCLES_MODE_1 IDENTIFY_DMA_CYCLES_MODE_2 IS_RDP MAX_ERRORS NativeModeAdapters NUM_NATIVE_MODE_ADAPTERS ReadBuffer ReadBuffer2 WaitForDrq WaitOnBaseBusy WaitOnBusy WaitShortForDrq WriteBuffer WriteBuffer2 WriteCommand

NATIVE_MODE_CONTROLLER_INFORMATION const NativeModeAdapters[] Initial value: { { "10ad", 4, "0105", 4} } Definition at line 319 of file atapi.h. Referenced by AtapiFindNativeModeController(), and DriverEntry().